User manual

RF Technology WinTekHelp User Manual Page 35
WinTekHelp User Manual 3.6.3 Baud Rate
The “Download Firmware” list item will take you to the same place that you would arrive at if you had chosen
the ”Other..” button from the Main Menu followed by the “Download new Firmware” button. (See Section 3.5)
The “Download Cmd File” list item can be used to download a program file containing both parameters and
channel data. It is very similar to choosing the ”Other..” button from the Main Menu followed by the
“Download Master BackUp File” button, (See Section 3.5), except that no assumptions are made about the file
name.
3.6.3 Baud Rate
Clicking on this option will open the Dialog Box shown in Figure 21. See section 3.4.
3.6.4 Channel Programming
Clicking on this, opens the dialog box as shown in Fig 2. See Section 3.2.
3.6.5 Parameters
Clicking on this, opens the dialog box as shown in Fig 17. See Section 3.3.
3.6.6 Operational Data
Clicking on this, opens either the dialog as shown in Fig 5 (exciter), or as shown in Fig 8 (receiver). See section
3.1
3.6.7 Help
Clicking on this, opens a single list item with title “About..”. Clicking on this, opens a dialog box that displays
the Software Revision for WinTekHelp.