User's Manual

ECLIPSE2 IPCommander User Manual
36
of the appropriate function block on the signal map.
• FM Modulator
• FM Demodulator
• Tone Encoder (CTCSS & DCS)
• Tone Decoder (CTCSS & DCS)
• P25 Modulator (APCO P25)
• P25 Demodulator (APCO P25)
For example, placing the tone decoder block into the signal map will enable the Subaudio
panel in RX profile.
Each channel is effectively a stored profile. Each entry in the channel table has an
associated channel number, a transmit frequency, a receive frequency and a reference
profile number.
To edit the channel name or frequencies double click the appropriate field, make any
appropriate changes and click the “Apply” button.
To make any channel active double click the leftmost column in the channel table and
click the “Apply” button.
A channel entry in the table will have a green icon displayed indicating that it is currently
active.
7.1. Overview
The Overview tab, within the channel panel, displays the profile number and name,
channel bandwidth and CTCSS tones. Every entry in the table has separate RX and TX
profiles.
The Eclipse2 can store up to 256 Profiles and 256 Channel Numbers.
7.2. FM & P25 RX Profile
Sets the channel bandwidth. Values are 12.5KHz or 25KHz.
7.3. FM & P25 TX Profile
Configures the following fields:
• Maximum Deviation
• Transmitter Hang Time from 0.1 to 99 seconds