User's Manual

ECLIPSE2 IPCommander User
Manual
The Gain function block has one input
attenuation or amplification for any audio signal.
Values range from +/-
40dB in steps of 0.1 dB.
As an example, using the Gain function allows the audio levels to be adjusted for the Line
In and Line Out audio ports.
6.2.10. Phase Invert
The Phase Invert block provides a 180 degree inversion of an audio signal.
Typically used for specialist applications to invert the phase of a FFSK signalling system.
6.2.11. Speaker
The Speaker function block allows any
mounted speaker.
Typical examples of using the Speaker function
•
Allows the Voice Reporting audio to playback through the local speaker.
•
Allows the monitoring of the receive and transmit audio paths.
• All
ows the monitoring of the Line Input and Output Audio Ports.
The Speaker audio level is adjusted by the use of the volume up / down buttons on the front
panel of the Reciter Module.
6.2.12. Microphone
The microphone function enables the front panel mounted
transmit or line audio paths.
6.2.13. Voice Reporting
Provides a voice report on the current base station status.
The output of the voice reporting can be routed to:
•
The transmit audio path to be transmitted to air.
• The
front panel Speaker (
Manual
The Gain function block has one input
and multiple outputs and provides audio level
attenuation or amplification for any audio signal.
40dB in steps of 0.1 dB.
As an example, using the Gain function allows the audio levels to be adjusted for the Line
The Phase Invert block provides a 180 degree inversion of an audio signal.
Typically used for specialist applications to invert the phase of a FFSK signalling system.
The Speaker function block allows any
audio signal to be routed to the local front
Typical examples of using the Speaker function
are:
Allows the Voice Reporting audio to playback through the local speaker.
Allows the monitoring of the receive and transmit audio paths.
ows the monitoring of the Line Input and Output Audio Ports.
The Speaker audio level is adjusted by the use of the volume up / down buttons on the front
The microphone function enables the front panel mounted
microphone to be routed to the
Provides a voice report on the current base station status.
The output of the voice reporting can be routed to:
The transmit audio path to be transmitted to air.
front panel Speaker (
use the Speaker Function block)
27
and multiple outputs and provides audio level
As an example, using the Gain function allows the audio levels to be adjusted for the Line
The Phase Invert block provides a 180 degree inversion of an audio signal.
Typically used for specialist applications to invert the phase of a FFSK signalling system.
audio signal to be routed to the local front
Allows the Voice Reporting audio to playback through the local speaker.
The Speaker audio level is adjusted by the use of the volume up / down buttons on the front
microphone to be routed to the