User's Manual

ECLIPSE2 IPCommander User Manual
14
data, including the signal map and channel profiles.
4.3.1. Backup
To start the Backup process select “Backup/Restore” from the Admin menu, then type a
filename for the backup file. Click “Save” and the backup process will start.
The backup process will take approximately two minutes to complete.
The backup file will have a default format of “[e-mail]”
• Where base_station_name is the text from the network
ing name field
• xxx.xxx.xxx.xxx is the IP Address of the base station.
• .ebs is the file extension of the backup file.
However, the Backup file can be changed to any name provided the file extension remains
as .ebs
4.3.2. Restore
To start the Restore process select “Backup/Restore” from the Admin menu, then
select a previously saved backup file, click “Open” and the Restore process will start.
The restore process will take approximately two minutes to complete.
4.4. Check for Update
Select “Check for Update” to make IP Commander to immediately check for any software
updates via the internet.
This function is currently not implemented.
4.5. Auto Check Updates
This selection allows IP Commander to check automatically for any software updates via the
internet.
This function is currently not implemented.
Figure
9
Base Station Configuration
Restore