User's Manual

ECLIPSE2 IPCommander User Manual
10
3. Base Station Menu
The Base Station Menu stores a list of base stations, to which IP Commander may be
connected.
3.1. Adding a Base Station Connection
To configure a base station connection, select from the main toolbar “File” then
select “Base Stations”
There are two default entries in the table:
• Eclipse2 default IP Address 192.168.1.201
• Local Base Station using the USB Port
A
ny entry can be added or removed from the list except for the Local USB Port.
NOTE: The USB Port is always present and cannot be removed.
To add a base station to the connection list, click “Add” and then enter a station
name, a description and the valid IP address of the base station.
An existing entry can also be edited or removed from the list.
Figure 5 Adding a Base Station Configuration