User's Guide

PinPoint 721 Tag and PinPoint Tag Programmer
PinPoint 721 Tag and PinPoint Tag Programmer
7
noitcnuFnoitpircseD
DIgaT.DIgaTehtsyalpsiD
etaRprihCyranoitatSsitessaehtnehwtceffenietarprihcehT
.yranoitat
s
edoMpeelSpeeDeboterasgaT127nehwylnoesuroF
yrettabgnolorpotdesU.deppihsroderots
.efil
ytivitisneSnoitoMotd
eriuqersinoitomhcumwohseifitnedI
.rosnesehttes
etaRprihCnoitoMsitessaehtnehwtceffenietarprihcehT
.gnivom
t
nuoCprihCnoitoMehtstimsnartgaT127ehtsemitforebmuN
otgninrutererofebetarprihcnoitom
.etaryranoitats
)sm(ec
nuobeDrepmaTrepmatgatehtrehtehwserugifnoC
gnittesecnuobedehT.tessinoitceted
127ehtemitfotnuomaehtsenimre
ted
repmaTehtgnireggirterofebstiawgaT
.mrala
etaRprihCrepmaTtessaehtnehwtceffenietarprihcehT
.repmatastrop
er
tnuoCprihCrepmaTehtstimsnartgaT127ehtsemitforebmuN
otgninrutererofebetarprihcrepmat
.edomnoitarepolamr
on
12
To configure the Pinpoint Tag Programmer
1 Plug the female adapter into the jack on the bottom of the PinPoint Tag Programmer.
2 Plug the additional 9-pin male adapter into an available Comm Port on the back of
your computer.
3 Verify that the Red ON LED is flashing to indicate power.
4 Note the Comm Port to which you connected the additional 9-pin male adapter.
PTP Cable
5 On your computer, click Start >> Programs >> Tag Programmer to access the PTP
Software.
6 Select File >> Properties.
The Properties Dialog box appears.
7 In the Communications Port drop-down list, select the Comm Port number that you
noted above.
8 Click OK.