User's Guide

PinPoint 721 Tag and PinPoint Tag Programmer
PinPoint 721 Tag and PinPoint Tag Programmer
5
Using the PinPoint Tag Programmer
When you initially receive the PinPoint 721 Tags, it is necessary to program them before use.
To do this, use the PinPoint Tag Programmer software. This reads and programs the 721 Tags
and enables them to work with your system. Before you can activate the tags, you must
configure the PTP unit to connect to the Comm Port on your computer and install the PTP
software on your computer. Use the following steps.
To install the PTP software on the computer
1 Insert the CD-ROM into the CD-ROM Drive.
2 Follow the steps on the screen to install the PinPoint Tag Programmer
software.
PTP Unit
721 Tag
14
721 Tag Specifications
PTP Specifications
snoisnemiDerusolcnE"49.x"57.2x"49.4
derewoPyrettaBnoitarepOyrettaBV9
slortnoChctiwSffO/nO
DELsrorrenosehsalf
dnarewoPsetacidnI-deR
sniamer,pu-ekawgnirudsehsalF-neerG
.snoitcnufgnimmargorpgniruddilos
ecafretnIlaire
SnoitcennoCecafretnI232-SRniP9
ycneuqerFevieceR/timsnarTzHK052
ycneuqerFzHM2442:xR
zHM0085:xT
eziS"576.x"283.1x"458.1
roloCeulB
thgieWsmarg72
erutarepmeTgnitarepO)F°941+otF°2
2-(C°56+otC°03-
noitisopmoCU753xolaV
efiLyrettaBsraey5efilyrettablacipyT
)etarprihcnotnedneped(
snoitalugeR,
tnailpmoC51traPCCF
tnailpmoCadanaCyrtsudnI
rebmuNtraP50-1001