User's Guide

PinPoint 721 Tag and PinPoint Tag Programmer

Removing a 721 Tag

The 721 Tag is applied using an adhesive pad. The following section provides detailed

steps about removing the 721 Tags that were applied to assets.

To remove a 721 Tag

1 Firmly grab the 721 Tag and move it in a twisting motion.

2 Continue this motion until the 721 Tag peels from the asset.

3 Clean the asset surface with Isopropyl Alcohol.

NOTE: Depending on the policies of your facility, you may also use other means of

removing a 721 Tag from an asset.

The 721 Tag can be attached using an adhesive pad that can be purchased with the 721

tag. The following section provides detailed steps about applying the 721 Tag using the

adhesive.

Applying a 721 Tag

NOTE: Depending on the policies of your facility, you may also use other means of

attaching a 721 Tag to your assets. For example, a loop mount zip tie.

To apply the adhesive pad to the 721 Tag

1 Remove an adhesive pad from the strip of paper.

2 Turn the 721 Tag onto its front.

3 Line the adhesive pad up with the back of the 721

Tag.

4 Apply the adhesive pad.

5 Verify that the pad is applied correctly and is not

hanging over the sides of the 721 Tag.

Adhesive Pad

Adhesive Pad applied

to the 721 Tag

To attach a 721 Tag to an Asset using an adhesive

pad

1 Obtain the asset to which you want to apply the 721

Tag.

2 Remove the adhesive plastic guard.

3 Firmly attach the 721 Tag to the asset.

4 Press firmly on the 721 Tag to verify that it adhered to

the asset.

721 Tag