User Manual
1) Loosen both set screws on the mount with the enclosed wrench.
Align the Antenna so it is oriented in the direction indicated by the
system integrator. Tighten both set screws
Technical Specification
2) Attach the Antenna to its appropriate Coaxial Cable. For tension
relief, insert a tie wrap through theguide on the back of the antenna and
secure the Coaxial Cable with the tie-wrap.
Installing the Antenna
PICTURE OF MOUNTED ANTENNA
Frequency: Tx: 2442 + 83.5 MHz
Rx: 5800 + 150 MHz
Power: 12 V DC (supplied from coaxial cable)
Radiation Pattern: Ellipto-conical (62° azimuth, 32° elevation)
Dimensions: 10 x 7x 2
Environment: -20°C 40°C (operating range)
5% - 95% humidity, no condensation
See Cell Controller/Antenna Data Sheets for details