User Manual

Antenna Placement Tips
The exact location of Antennas will be determined by a certified 3D-iD
system integrator. The Antennas will be positioned to optimize the
locating capability of the system in accordance with the requiremetns
set forth by the customer.
The Antennas must be placed within sufficient distance of their corre-
sponding Cell Controller (100 feet). The Coaxial Cables connecting an
Antenna to its Cell Controller must not be stretched, kinked or other-
wise damaged during Antenna installation.
The Antennas should not be placed very close to metal walls, micro-
wave ovens or other objects that will hinder their performance. Metallic
objects and dense walls can alter the radiation pattern of the Antennas.
The Antennas should be mounted in locations that prevents accidental
contact or intentional destruction. Mounting the Antennas near ceilings
and out of reach is strongly recommended.
The antenna must be installed so that there is at least a 6 inch gap
between it and any possible contact with people. Failure to install it in
this fashion may invalidate the users license to operate this product.