Installation Guide

Inst alling T ags
Maintaining the Tag
The ViewPoint software package contains a battery monitoring
application which will generate a report of all Tag s that have
a low battery (See the ViewPoint User s Manual for more
information). To change the Tag s battery:
1. IIf the Tag is mounted to the Asset Mount, remove the Tag
from the Mount.
2. Detach the battery case by carefully unscrewing the seven
(7) screws holding it to the Tag. The screws are on the rear
of the t ag (the side with no logo).
3. Carefully separate the Battery Case from the Tag.
4. Properly dispose of the old battery case.
9
Picture of a Tag open with
the battery separate
tags.qxd 5/5/99 4:27 PM Page 9