Installation Guide

Inst alling T ags

Mounting Tags - Asset Mount

The asset mount can be used to attach the Tag to any flat surface

or curved surface (up tp 2 diameter), such as a narrow bar

or a pole.

Mounting to a flat surface:

1. Affix the bottom (flat side) of the mount to the desired sur -

face using the double-sided tape.

For information about more securely attaching the mount to

an asset (e.g. screwing it to the asset), please cont act your

certified system integrator.

2. Screw the tag to the mount using the two (2) security screws

and the security screw driver. Ensure that:

- The logo is facing outwards

- The screws are not overtightened (overtightening can

damage the Tag package)

3. The Tag and Mount should appear as shown.

tags.qxd 5/5/99 4:27 PM Page 5