User manual
RF Neulink
NL6000 User Guide
7
The NL6000s powerful and efficient packet communications protocol provides a solution to
many of the problems affecting conventional wireless data networks. Bursts of noise, RF
interference, inter-modulation, overload, and signal fade can corrupt and interrupt radio data
links. The NL6000 eliminates these problems through the use of advanced technologies
including sophisticated forward error corr ection tec hnology.
The NL6000 can transmit in any of the following frequenc y ranges:
•
VHF 136 162 MHz
•
VHF 148 174 MHz
•
VHF 216 235 MHz
•
UHF 400 420 MHz
•
UHF 450 470 MHz
1.1. Features
The following list highlights the primary features of the NL6000:
Product Reliability
The NL6000 makes extensive use of Digital Signal
Processing (DSP) technology resulting in outstanding
performance under adverse environmental conditions.
Data Reliability
Advanced signaling end error control technologies
provide exceptional performance under poor channel
conditions.
RF Data Rate
The NL6000 can transmit or receive at over-the-air rates
of 12,000 bps within narrowband or 22,050 bps within
wideband channels.
Protocol Flexibility
The NL6000 provides three data transmission modes
resulting in peak system performance for a wide range of
data communication scenarios.
Easy Use Interface
An easy to follow menu-based user interface makes
configuring the NL6000 a simple task.
Base Station Configuration
The NL6000 can be configured as a remote or a base
station. A remote transmits data to a specific unit or group
of units. A base station transmits data to multiple units or
groups.
Repeater Co nfigura tion
In areas where you l ack a reliable path, you can
configure an NL6000 unit as a repeater to reach a
hidden unit. This feature can fill in RF blind spots or
extend the usable range of the systems desired
coverage area.