User manual

RF Neulink NL6000 User Guide
27
6. Procedures
This section includes step-by-step procedures for configuring all the parameters that
control the operation of the NL6000. The procedures are grouped into the following
categories:
• General Procedures
• Radio Network Setup
• Serial Connection Setup
• Data Setup
• Repeater Setup
• File Management
Configuration of the NL6000 parameters is easy using the menu-driven user
interface. When you enter programming mode using the terminal emulator, a Main
Menu appears. The procedures in this section assume you always begin at the Main
Menu . The Main Menu appears as in Figure 17.
Figure 17: NL6000 Main Menu
In most procedures, you must enter at least one submenu to perform a task. The
following text is an example of a step that leads you to the correct submenu option:
Select Network ä Unit Type”
This example means that from the Main Menu , you must select the Network option
and then select the Unit Type option from the submenu that appears. Throughout
this section, the arrow ( ä ) directs you through a series of submenu options.