User's Manual

RF-Smart – User Manual Rev 1.1 – 12/11/2019

• RF2_B (GPS) LED SMART TBD, USED SW dependent

• RF2_A (GPS) LED GPS blinks one per seconds if GPS present

3.4 SIM DRAWER OPTION CELLULAR COORDINATOR

Please insert the SIM card on the following direction into the SIM push-push.

3.4 USB connector

In 3G versions, for programming and debugging the Telit GSM module

In Smart Version the USB is connected to a USB Hub managed by the Linux, any standard

USB2 device can be connected to this port (max current supply 500mA fuse protected)

(Managed by Linux, required user SW and device drivers to operate it)