User guide

RF Mogul Indoor Unit User Guide
12
Operation
perationperation
peration
POWER ON Pressing the POWER ON button will turn ON the power to the controller enabling it
to perform the next function. Wait for this display to appear.
SEARCH (UP) Pressing the SEARCH button will instruct the mount to begin its searching routine
and locate the satellites according to the settings of the dip switches.
STOW: (DOWN) Pressing the STOW button will instruct the mount to return to its Stowed or travel
position and turn power OFF automatically. Note: be sure 12 VDC is present.
SEARCH (UP) & STOW (DOWN): Pressing the SEARCH and STOW buttons at the same time will
manually turn the Power OFF.
AFTER LOCKING ONTO THE PROPER SATELLITE: The controller will remain ON and then turn
off after 2 1/2 minutes. To STOW the dish press the POWER ON button to turn the controller ON and then
press STOW.
The displays will look like this for each function
(CONFIGURATION refers to the Dip Switch settings that determine which satellites to locate.)
See LCD Displays in this manual for all displays.