User guide

RFM-1000/1100 Technical Manual
2
WARNING
Make all electrical and coax connections from the controller to the
mount and LNB's BEFORE applying power to, or connecting the
satellite receiver to the controller.
Note: When the controller is turned OFF it will still pass voltage from the receiver to the
LNB if the receiver is plugged in to 110 AC. Shorting of the coax at any time during
installation may cause damage to either the Controller or the DiSEqC Switch. Failure to
follow this procedure can result in voiding of warranty replacement, not to mention time
spent trying to troubleshoot a system that does not perform.
90% of all problems are a result of CONNECTIVITY or CONFIGURATION.