Installation guide

Mount Installation Guide
6
MOUNT ROTATIONS
The mount will use the rotation of three (3) axis to achieve acquisition. Terminology is helpful when
conversing with your installing dealer or a factory support technicians. Earlier in this manual you were
given instruction concerning the components of the mount. We will now discuss the rotation of the mount
and what is accomplished with each movement.
Rotation of the base in a clock
wise/counter clockwise is call
AZIMUTH
Tilting of the antenna from side
to side is called SKEW
The antenna in the travel
position is called STOWED
To FRONT of vehicle
Antenna in the upright position
and not moving is called
DEPLOYED
Movement of the antenna from the STOWED position
to the DEPLOYED position is called ELEVATION