Instruction Manual

5.8GHz Transmitter / 5.8GHz Receiver
1 –Channel selector(5CH or 8CH).
8CH→No：0,1 is CH1； 8,9 is CH8
5CH→No：0,1 is CH1； 5,6,7,8,9 is CH5
2 –Video level adjustment
3 –Power indicator light.
4 –Power ON/OFF switch.
5 –DC power input.
6 –Audio jack left (white).
7 –Video jack BNC connector.
8 –Audio jack right (red).
9 –Antenna SMA connector.
To enjoy a life of wireless video and audio, just connect the transmitter to any
A/V source you like and connect the receiver to a TV, monitor or speaker in
another location.
□ Transmitter
□ Receiver
NOTE: Make sure the ON/OFF switch is in the 「OFF」position before connection
3. Setup Guide 2. Panel Control and Function
Connect one end of the RCA cable (or scart cable) to the audio and video jacks,
and connect the other end to a source device via its “AV output”.
1. Connect the DC plug of the adapter to the DC jack, and connect the power
1Connect one end of the RCA cable (or scart cable) to the audio and video jacks,
and connect the other end to a TV (or monitor, speakers) via its “AV input”.
1. Connect the DC plug of the adapter to the DC jack, and connect the power
supply to an outlet.
5 4