Specifications

http://www.rf-link.com/ 6 / 16
Packet and Wake-up frame
n Transmit Beamforming
n Support S3/S4 AES/TKIP group key update
Peripheral Interfaces
n Up to 15 General Purpose Input/Output pins
n Three configurable LED pins (mux with
GPIO pins)
PHY Features
n IEEE 802.11ac OFDM
n IEEE 802.11n OFDM
n One Transmit and One Receive path
n 5MHz / 10MHz / 20MHz / 40MHz /
80MHz bandwidth transmission
n Support 2.4GHz and 5GHz band channels
n Short Guard Interval (400ns)
n Sounding packet.
n DSSS with DBPSK and DQPSK, CCK
modulation with long and short preamble
n OFDM with BPSK, QPSK, 16QAM,
64QAM and 256QAM modulation.
Convolutional Coding Rate: 1/2, 2/3, 3/4,
and 5/6
Bluetooth Controller
n Compatible with Bluetooth 2.1+EDR
n Support Bluetooth 4.2 system
n Integrated MCU to execute Bluetooth
protocol stack
n Supports all packet types in basic rate and
enhanced data rate
n Supports piconets in a scatternet
n Supports Secure Simple Pairing
Bluetooth Transceiver
n Fast AGC control to improve receiving
dynamic range
n Supports AFH to dynamically detect
channel quality to improve transmission
quality
n Integrated internal Class 1, Class 2, and
n CCA on secondary through RTS/CTS
handshake.
n Support TCP/UDP/IP checksum offload
n Generates 40MHz clock for peripheral chip.
n Single external power source 3.3V only
n Maximum data rate 54Mbps in 802.11g,
150Mbps in 802.11n and 433.3bps in
802.11ac.
n Switch diversity used for DSSS/CCK
n Support STBC Receiving
n Support LDPC Transmitting
n Hardware antenna diversity
n Fast receiver Automatic Gain Control
(AGC)
n On-chip ADC and DAC
n Build-in both 2.4GHz and 5GHz PA
n Build-in both 2.4GHz and 5GHz LNA
Class 3 PA
n Supports Low Power Mode (Sniff/Sniff
Sub-rating)
n Enhanced BT/WIFI Coexistence Control to
improve transmission quality in different
profiles
n Bluetooth 4.0 Dual Mode support:
Simultaneous LE and BR/EDR
n Supports multiple Low Energy states
n Supports Enhanced Power Control
n Supports Bluetooth Low Energy
n Integrated 32K oscillator for power
management