User's Manual

©2015 RF IDeas
Configuration Utility User Manual
P a g e | 69
Selecting the Bits to Use for the Card ID Field
1. In this example field 2 “ID” (A) is used as the field for card ID. In the “Where” box, the “Start bit”
(B) field is used to determine the ID start position.
2. The size or number of bits used for the ID are determined by the “Number of bits” field (C).
3. The bit box (D) displays the value of the selected bits in blue.
4. The blue data box (E) contains the value of the selected bits.
5. Press the “Write Active” button to store the new settings in the reader.
Image 90: Selecting the Bits to Use for the Card ID Field