User's Manual

©2015 RF IDeas
Configuration Utility User Manual
P a g e | 68
Selecting the Bits to Use for the Facility Code (FAC) Field
1. In this example field 1 “FAC” is used as the field for our facility code. In the “Where” box, the
“Start bit” (A) field is used to determine the facilitiy code start position.
2. The size or number of bits used for the facility code are determined by the “Number of bits” field
(B).
3. The bit box (C) displays the selected bits in blue.
4. The blue data box (D) contains the value of the selected bits.
Image 89: Selecting the Bits to Use for the Facility Code (FAC) Field