User's Manual

©2015 RF IDeas
Configuration Utility User Manual
P a g e | 56
Image 70: Output Example
In the example Image 52, the Personal ID starts at bit 111, and is 50 bits long.The Bit Range is 111 ..
160 and the card bit pattern is highlighted. This output format is displayed in binary coded decimal with
parity (BCD with parity). This is the 245 bit configuration. If any additional keystrokes were entered to
precede the card data, click Clear to remove them. The Bit Range that displays to the left of the binary
bit pattern is the Start Bit field total + the Bits field total – 1 .
The status message displays the number of bytes used and the remaining number of available
keystrokes. The amount is determined by the reader’s memory size. In the example the
“Keystrokes: 0 of 32 bytes used. Room for 15 keystrokes.” Each field has a 15 keystroke limit. This
may be reduced because all the fields share 92 bytes of the extended device memory.