User's Manual

Configuration Utility User Manual

P a g e | 55

GetID Click to display the binary bit pattern captured from the card.

Start Bit Enter a number to define the left most significant starting bit for the field.

Bits Enter the number of bits to add to the Start Bit to define the range of bits in the field.

Digits This is the number of digits that will display in a selected field.

Up Click to move the highlighted field up one position.

Down Click to move the highlighted field down one position.

Several of the field operators are mutually exclusive and all are performed in a relative order that

can have a significant impact on the final conversion. If more than one field operator is selected, this

is the order in which the configuration settings are applied to the card ID data.

Octal Conversion is mutually exclusive with all others  5-bit mag stripe data is mutually exclusive

with all others  Reverse Bits  Reverse Bytes  Invert Bits  Hashing algorithm.

Bits Window

This window displays the bit ranges for each of the enabled fields on the card.

For FIPS201 reader each field may have from 0 – 15 key strokes, but for pcProx Plus reader with

extended feature each field may have 0-31 key strokes.