User's Manual

Configuration Utility User Manual

P a g e | 45

Software Developer’s Kit

Function Description

Disable Keystrokes for SDK

(Halt Keyboard Send)

Check to disable keystroking. When keystroking or unsolicited (Halt

Keyboard Send) serial out is disabled, all card data must be read via the

SDK functions.

LED

The LED section allows users to control the LED light actions on the device to provide users info

regarding the card data.

Functions Descriptions

Auto

Select this to make the device set the LED color.

Off Select this to set the LED to off.

Red

Select this to set the LED color to red.

Green Select this to set the LED color to green.

Amber

Select this to set the LED color to amber.

Logical Unit ID

A user defined 16-bit Logic Unit ID to identify one device from another.

Image 57: Logical Unit

Beeper

Functions Descriptions

Enable Beep on

Card Read

Check this to set the device to beep when a card is read.

Beep Now Press to listen to the beep the reader will provide when in use.

Long Beep(s)

Check the box to configure a long beep of 375 msec. By default the beep is set to a short

beep of 125 msec. 2 long beeps or 5 short beeps are allowed only.