User's Manual

©2015 RF IDeas
Configuration Utility User Manual
P a g e | 43
Status Bar
Image 53: Status Bar
3.7 Timing Tab
Use this tab to configure the device’s card timing and USB keystroke timing.
Card Data Hold Time: This option allows users to determine in millisecond’s how long they need to wait
before the device is able to read the next card in line (which is also how long the LED will remain green
after a card read).
The timing options can range from 50 to 9950 min/max (50 milliseconds increments only) and the default
is set to 1000.
This is how long the data is available for the SDK user.
Continuous Read, Sends Data upon Read: When a card is placed on a device, this option will allow
the data to be sent continuously.
Lock-Out Time for Repetitive Reads: The time that it takes the reader to read another card must be
equal to or greater than the hold time and is only done in 50 milliseconds increments.
For a 2 configuration device (pcProx Plus) the lock-out time is the same as card data hold time.
Image 54: Card Read Timing
Card data hold time, and Lock-out time for repetitive reads are adjustable in increments and
decrements of 50 msec.