User's Manual

©2015 RF IDeas
Configuration Utility User Manual
P a g e | 15
The cloning feature clones the current device configuration settings to other devices.
Functions Descriptions
Only update readers
within the LUID range
Check to filter which devices will be cloned. Uncheck to clone all devices.
Minimum LUID Minimum LUID value to filter a range of devices to be cloned. Default is 0x0000.
Maximum LUID
Maximum LUID value to filter which devices will be cloned. Default is 0xFFFF.
Write LUID
Check to write a new LUID to the device after cloning.
Starting LUID
The next LUID value to be written. Default is 0x1000.
Increment by
Adds Increment by value to the LUID after writing to the device. Default is 0x0001.
Default
Reset the fields to their default value.
Log
Lo
gs of cloning process.
Clear Log
Clears all log info from Log area.
To enter LUID value in hex use ‘0X’ prefix.
To initiate the cloning process:
1. Connect to the reader and click the “Connect” button.
2. Under the “Device” menu, click “Clone selected reader configuration to other devices…”
option.
Image 12: Starting the Cloning Process
3. The “Clone Reader Configuration” dialogue box will appear as shown below: