User's Manual

©2015 RF IDeas
Configuration Utility User Manual
P a g e | 12
What is libusb?
“libusb-win32” is a port of the USB library. The library allows user space applications to access
many USB devices on Windows.
Save USB device hex raw data to (SDK) file…: A USB raw feature report dump to an ASCII text file.
Save USB device hex raw data to (SDK) file option is enabled for USB readers, not for serial and
NTWCC readers.
All bytes are displayed as upper case hex digits, with one space between the hex bytes.
Exit: Exits out of the entire utility.
Connect Menu
The Connect menu provides options for device to utility connections.
Auto Connect to USB on Start-up: Set as utility default connection. Through this connection the utility
searches for a USB connection on startup.
Auto Connect to Serial on Start-up: With this selection, the utility searches for any available serial
connections on startup.
Auto Connect to Ethernet on Start-up: Utility option to search for Ethernet connections on startup.
Why use the Auto Connect feature?
Provides easy access to all the available readers on the specified port during application start-up.
Connect: This selection has the utility search for a device connection through all available port
connections.
Why use the Connect feature?
The utility’s general connect option gives users the ability to connect their device to the utility,
without the need of the user to identify the devices actual interface connection. This feature cycles
through all available interfaces until a device is found.
For further information on the connect option, see 3.4 Icon Toolbar, under the Connect section.