User's Manual

ManualsBrandsRF Ideas ManualsElectronicsUSB RFID Reader

(

C

onnect

Tab--Cont.)

Ethernet (Local IP 10.10.10.65): Connects

to

an Ethernet reader

at the

given IP address and

open

a TCP/IP on

the

given port. The

first,

second, third, and

fourth

byte

of the

TCP/IP address need

t

o

be entered

for the

interface

to

connect

to the

reader. The IP

port

number

will

also be

required.

P

or

t

Option:

Allows for

changing

the port

location.

Xport port

location needs

to

match

this

number

Note:

Ports below 1024 are

for

system use

only

.

Find Next IP Button: Looks

for

other readers on

the

same ethernet c

onnection.

Device List Pull-down: Lists

the

devices

that the utility is

actively connected

t

o

.

For Example,

if

you have an RJ45 connector (as seen

below) then

the

specific logical

protocol

connection

to

be selected

is Ethernet.

Note:

Remember,

not all

USB

interface connections do

not

necessarily logically connect

through

USB.

If

your device has a USB

c

onnect

or

,

and your device

part

number suffix

is xx0 or

xxF,

the

logical protocol connection

is

made through COM.

A

device

with a

USB

interface connector and

a

part

number suffix

of

xxU

will

connect through

the

USB connect

option.

C

ONNE

C

T

ORS