User's Manual

32 Chapter 3 Software
Logical Unit ID: A user defined 16 bit Logic Unit ID to identify one device from another.
Beeper
Function Description
Enable Beep on Card Read Check this to set the device to beep when a card is read.
Beep Now Press to listen to the beep the reader will provide when in
use.
Long Beep(s) Check the box to configure a long beep of 375 msec. By
default the beep is set to a short beep of 125 msec. 2 long
beeps or 5 short beeps are allowed only
The number value input area to the right of the Long Beep(s) box is designated for the number of
beeps to produce when the device is in use.
OEM Converter Board
Function Description
Beeper On (Output Active Low) Check this to turn the device beeper on.
Relay On Check this to activate the OEM board.