User's Manual

SASL User Guide v1.40 - Part # ITCS-A-100-001 v1.40 May 2014
5
Installation
MECHANICAL INSTALLATION
Each model of the ITCS-A-21X family of SASL units is mounted slightly differently. SASL units
weigh up to 100 lbs (46.3 kg), so it is important to ensure that the structure, to which the SASL is to
be attached, is of sufficient strength. The SASL may be ceiling mounted, wall mounted or attached
to a suitable stand. A safety cable rated at three (3) times the hanging weight of the SASL and
associated hardware must be secured to a separate fixture and attached to the SASL mounting
bracket.
When mounting the SASL as a stand-alone unit, make sure that it is mounted the correct way up as
indicated by information in the Technical Manual, for the specific SASL. If the SASL is one of
several and is part of an ITCS network, then orient each SASL according to the ITCS system
installation drawings. If in doubt contact a member of our technical support team.
ITCS-A-210
The ITCS-A-210 SASL is provided in its standard configuration with a mounting bracket for
installation in a landscape orientation. When mounting the SASL refer to Figure 4. Consult the
Technical Manual, for further information. Contact a member of our technical support team for
more information.
ITCS-A-212
The ITCS-A-212 SASL is only mounted in a landscape orientation because the array is
symmetrical, there is no benefit to mounting the array in a portrait fashion. When mounting the
SASL refer to Figure 4. Consult the Technical Manual, for further information. Contact a member
of our technical support team for more information.
When mounting the SASL as a stand-alone unit, make sure that it is mounted the correct way up as
indicated by information in the Technical Manual, for the specific SASL. If the SASL is one of
several and is part of an ITCS network, then orientate each SASL according to the ITCS system
installation drawings. If in doubt contact a member of our technical support team.
SAFETY WARNING
The ITCS-A-200 SASL weighs approximately 100 lbs. (49 kg), and ITCS-A-202 weighs
approximately 50 lbs (23kg). These units should only be installed using suitable safety and
lifting equipment. Ensure that the wall fixings or mounting hardware is suitably rated.
AVERTISSEMENT DE SÉCURITÉ
ITCS-A-200 SASL pèse environ 49 kg, et des ITCS-A-202 pèse environ 23 kg. Ces unités
ne doivent être installés à l'aide des équipements de sécurité et de levage approprié.
Veiller à ce que les fixations murales ou le matériel de montage est convenablement
évalués.