User's Manual

SASL Installation Guide V1.11 - Part # ITCS-A-100-001v1.11 May 2009
9
WARNING
The interconnect wiring and cables on the rear of the SASL are factory installed and are not
intended to be field serviceable. The RF cables are specially tuned. Any tampering or
modification of these cables or connections will invalidate type approval and may seriously
compromise the device performance. Note that the connectors are fitted with tamper evident
seals.
NON IONIZING RADIATION
This unit incorporates a Radio Frequency Transmitter and should therefore be installed and
operated so as to avoid exposure of any persons to unsafe emissions. The FCC requires that any
antenna, which includes the SASL, be mounted so that a separation distance of at least 20cm is
provided from all persons. See FCC Radiation Exposure Statement in the Safety Instructions
section of this guide.