User's Manual

SASL Installation Guide V1.11 - Part # ITCS-A-100-001v1.11 May 2009
4
INDICATOR LIGHTS
Reader Indicator Lights
There are four lights on the back of the SASL located on the SIRIT RFID reader.
The indicator lights on the SIRIT RFID reader are:
• Sense – Indicates that the reader has detected a tag in the RF field
• Transmit – indicates that the reader/writer transmitter is operating (RF on)
• Fault – Indicates that there is a fault
• Power – Indicates that power is applied to the reader
Note that when the SIRIT reader is performing power on auto-test, the indicator lights will flash
momentarily.
Figure 2
SIRIT RFID Reader Indicator Lights.
Array Controller Indicator Lights
There are two indicator lights on the Array Controller used to indicate the health of the system.
These are
• Status – The flash repetition rate indicates the status of the Array Controller. See the SASL
Technical Manual for further information
• Power – Indicates that the power supply is on and healthy.
Figure 3
Array Controller Indicator Lights