User's Manual

SASL Installation Guide V1.11 - Part # ITCS-A-100-001v1.11 May 2009
14
Safety Instructions
This unit emits Radio Frequency non-ionizing radiation. The installer must ensure that the antenna
is located or pointed such that it does not create an RF field in excess of that permitted by the
Health and Safety Regulations applicable to the country of installation.
FCC Radiation Exposure Statement
The antenna used on this equipment must be installed to provide a separation distance of at
least 20cm from all persons and must not be co-located or operated in conjunction with
another antenna or transmitter.
FCC Part 15 Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Power Disconnect Device
The plug on the power supply cord is intended to be the power disconnect device. The power
source (socket or outlet) shall be located near the equipment and shall be easily accessible.
The SASL products and individual BESPA components are protected by one or more
US and International Patents pending .
The “RF Controls” logo, and the words “RF Controls, Identify, Locate, Track”, “ITCS” and
“SASL” are registered Trademarks of RF Controls, LLC.
RF Controls, LLC
1141 S. 7
th
Street
St. Louis
MO 63104-3623
USA
Phone: [phone]
Fax: [phone]
e-mail: e-mail: [e-mail]
Web site: http://www.rfctrls.com