User's Manual

SASL Installation Guide V0.9 - Part # ITCS-A-100-001v0.93
7
MULTIPLE SASL UNITS CONFIGURED AS AN ITCS
Two or more SASL units may be connected via an Ethernet network to an ITCS Edge Server to
form an Intelligent Tracking and Control System. The diagram in figure 6 illustrates the basic
system architecture. The RF Controls System Integration Manual provides details on how to
install, configure and calibrate an ITCS. The Programmers Reference Guide provides details of
the Application Program Interface (API) used by the ITCS.
Figure 6
Intelligent Tracking and Control System comprising a number of SASL units connected via an
Ethernet Network to an ITCS Edge Server
NON IONIZING RADIATION
This unit incorporates a Radio Frequency Transmitter and should therefore be installed and
operated so as to avoid exposure of any persons to unsafe emissions. The FCC requires that any
antenna, which includes the SASL, be mounted so that a separation distance of at least 20cm is
provided from all persons. See FCC Radiation Exposure Statement in the Safety Instructions
section of this guide.