User's Manual

SASL Installation Guide V0.9 - Part # ITCS-A-100-001v0.93
5
Installation
MECHANICAL INSTALLATION
The SASL is provided in its standard configuration with a mounting bracket for installation in a
landscape orientation. An optional portrait mounting bracket is available if under special
circumstances an installation configuration requires the SASL to be installed in portrait orientation.
Contact a member of our technical support team for more information.
The SASL unit weighs 75 lbs (34 kg), so it is important to ensure that the structure, to which the
SASL is to be attached, is of sufficient strength.
The SASL may be ceiling mounted, wall mounted or attached to a suitable stand. When ceiling
mounted, a separate safety cable must be secured to a ceiling fixture and to one of the eyes the
SASL mounting bracket.
The SASL mounting bracket incorporates a mounting tube which is designed to be attached to
industry standard
“UNISTRUT
®
” industrial framing systems. (See: www.unistrut.com for more
information). Figure 2 shows the SASL mounted on a frame.
When mounting the SASL as a stand-alone unit, make sure that it is mounted the correct way up as
indicated by the arrow on the back panel. If the SASL is one of several and is part of an ITCS
network, then orientate each SASL according to the ITCS system installation drawings. If in doubt
contact a member of our technical support team.
Figure 4
Mounting bracket
.
SAFETY WARNING
The SASL weighs 75lbs (34kg) and should only be installed using suitable safety and lifting
equipment. Ensure that the wall fixings or mounting hardware is suitably rated.