Installation Instructions

SASL User Guide v1.10 - Part # 11400-431 October 2015
7
Usable Frequency Range in US and Canada
In USA and Canada this device is factory programmed to operate in ISM 902MHz – 928MHz band.
MULTIPLE BESPA UNITS CONFIGURED AS AN ITCS
Figure 5 shows how two or more ITCS-A-300 BESPA units may be connected via an Ethernet
network to an ITCS Location Processor. One Location Processor and multiple distributed BESPAs
operate collaboratively to form RF Controls’ Intelligent Tracking and Control System (ITCS™). In
this example two BESPA units have been attached to the network. Combinations of the various
model BESPA units may be mixed and matched as required to suit a particular installation. The RF
Controls Technical Manual provides details on how to install, configure and calibrate an ITCS.
The Programmers Reference Guide provides details of the Application Program Interface (API)
used by the ITCS.
Figure 5 Intelligent Tracking and Control System comprising a number of BESPA units connected via
an POE+ Ethernet Network to an ITCS Location Processor