User Guide

Appendix B
USB Port Setup
INfinity 610 User’s Guide
85
B USB Port Setup
The INfinity 610 is equipped with two USB 2.0 ports:
h USB Type B – Provides connectivity to the INfinity 610 console. This
connection is used to send commands and receive responses and is
typically connected to your server.
h USB Type A – Used for external devices such as printers, external hard
drives, or other peripherals.
For standard communications, connect a USB Type B cable to the reader
and then to your PC or server. The maximum cable length is five meters to
the nearest hub, router, or computer.
B.1. Windows XP Driver Installation and Setup
1 Create a directory called:
c:\Windows\System32\drivers\Sirit
2 Copy file linux-cdc-acm.inf from the USBWinDrivers directory
on your Documentation CD into the new directory.
3 Verify that the c:\Windows\System32\drivers\usbser.sys
exists.
4 If the file exisits, go to Step 7.
5 If the file does not exist does not, copy file xp_usbser.sys from the
USBWinDrivers directory on your Documentation CD into
c:\Windows\System32\drivers.
6 After copying, rename xp_usbser.sys to usbser.sys .
7 Connect the reader to your computer using an A-B USB cable.
8 After a brief delay, your computer will detect a new device and the
Hardware Wizard will pop up.