User Guide

1 2 3 4 5
6
7 8 9
Reader Configuration Tool
INfinity 610 User’s Guide 49
6.1.7. Setup Antenna/Cables
This page allows you to configure the reader’s antenna multiplexer
sequence ass well as conducted power. For detailed description of each of
the antenna and cable variables, refer to Antenna Configuration in Chapter
4 – Reader Behavior of the INfinity 610 Protocol Reference Guide.
To configure an antenna, enter the antenna number in the
Mux Sequence
field. The individual antenna
Conducted Power fields will be activated in
the lower window. The current values will be displayed. Only those antennas
listed in the
Mux Sequence will be shown. Also, you must set Conducted
Power
to 0 in order to set or change the Attenuation, Cable Loss, or Gain.
To change, enter the appropriate values for each antenna parameter and
press the
Submit button to update the antenna and cable configuration.
Select the next antenna and repeat.