User Guide

1 2 3 4
5
6 7 8 9
Reader Startup Tool
28
INfinity 610 User’s Guide
Select Protocol
You can activate one or more protocols on the INfinity 610 using RST. From
the pull-down menu, select
Protocols→<protocol>. Active protocols are
indicated by
.
Antenna Selection
You can select the ports that have antennas connected and which antennas
are active. Perform the following:
1 From the pull-down menu, select Antennas→<n>. Active antennas
are indicated by .
2 You can also select the order in which antennas are activated. From the
pull-down menu, select
Antennas→Mux sequence....
3 Enter the antenna numbers in the order to be activated.
4 Press
OK.