User Guide

1 2 3 4
5
6 7 8 9
Reader Startup Tool
INfinity 610 User’s Guide 27
Login to Reader
To login to the reader, perform the following:
1 From the pull-down menu, select
Reader→Login….
2 Select the type of
Login from the pull down. The default login is guest. If
you need administrator privileges, login as
admin.
3 Enter your
Password. Enter readeradmin as the password if you logged
in as
admin.
4 Press
OK.
Select Operating Mode
From the pull-down menu, select Operating Mode→<Active | Standby>
or, press the Operating Mode select button on the left side of the tool bar.
h
Active – Reader is continuously attempting to singulate tags and
automatically reports any singulated tag via an asynchronous event
notification on the event channel.
h
Standby – Reader is not transmitting any RF energy, unless processing
a tag related command. The transmitter is enabled at the beginning of
the command processing, protocol operations required for the
command are performed, and then the RF transmitter is turned off.