User Guide

1 2
3
4 5 6 7 8 9
RST Software Installation
INfinity 610 User’s Guide 11
5 Press Next>. 6 After the installation completes, press
Close.
3.2. Windows 7 Setup
If you have a Windows 7 operating system, your firewall may block UDP
traffic and consequently RST may not discover your readers. Perform the
following to configure your system:
For Microsoft Firewall
1 Log into your computer as Administrator.
2 Navigate to the Control Panel and select
Control Panel → System and Security.
3 Select
Allow a program through Windows firewall.
4 Scroll down the list and locate
Startup Tool, check it, and press OK.
5 If Startup Tool is not in the list, press
Allow another program.
6 Locate
Startup Tool, check it, and press OK.
7 Restart RST and it should discover readers.
For Third-Party Firewalls
1 Log into your computer as Administrator.
2 Set your firewall to allow RST to receive UDP traffic on port 50000 and
50001.