User's Manual

CS-490 NA BESPA User Manual Rev2.0 - Part # 11900-439 Aug 2020
7
-SOFTWARE
Operation requires the purchase of a Software License. Software may then be downloaded
from the RFC Customer Portal. https://support.rf-controls.com/login For additional
information about RF Controls, LLC antennas, contact [e-mail].
APPLICATION INTERFACE
The BESPA uses an International Standard, Application Program Interface (API) as defined
in ISO/IEC 24730-1. Further details of the API and commands are contained in the
Programmer’s Reference Guide.
-SPECIFICATIONS
CS-490
Frequency
RF Radiated Power
Regulatory Compliance
Safety Regulations
Reading/Writing Protocols
FCC ID IC ID
Application Interface
UHF band: 902-928 MHz
1
Adjustable 0.05W to 4Watts EiRP
FCC, CFR47 Part 15.247, RSS-247 Issue 2, RSS-Gen
Issue 5, RSS-102 Issue 5
IEC62368-1
ISO18000-6C / EPC UHF Gen 2 EM 4122 (TTO)
FCC: WFQCS-490 IC: 10717A-CS490
ISO/IEC 24730-1
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
Dimensions Weight
-22 to +113°F (-30 to +45°C)
-40 to +185°F (-40 to +85ºC)
5 to 95% non-condensing
46in x 24in x 4in (115 x 60 x 10 cm) 26 lbs (12 kg)
Ethernet LAN
RJ-45 Connector
Power
Current and Voltage
POE+ DC Input IEEE 802.3at Type 2 Class 4
0.35 Amp at +48Vdc
Antenna Gain
2
~7.7 dBi Circular Polarization
~12.5 dBi Linear Polarization Vertical and Horizontal
Antenna FWHM Beamwidth
3
18/33 degrees
1
The BESPA uses the RFC CS-490 RFID reader that is factory set at time of shipping, to suit the country of
installation and use. Transmit Frequency range for the CS-490 NA model is 902-928MHz
2
Value over Operating Frequency Range at all steer angles as referenced to an isotropic antenna.
3
Maximum -3dB FWHM value over Operating Frequency Range at all steer angles.