User's Manual

CS-490 NA BESPA User Manual Rev2.0 - Part # 11900-439 Aug 2020
4
-Indicator LEDs
CS-490 Reader Indicator Lights
The RF Controls CS-490 RFID antenna is equipped with three status indicators
located on the top of the Radome. If the LED indicators are enabled, these
LEDs provide indication according to the following table:
Indication
Color/State
Indication
Transmit
Off
RF Off
Yellow
Transmit Active
Fault
Off
OK
Red-Flashing
Error/Fault Blink Code
Power/
Tag Sense
Off
Power Off
Green
Power On
Green – Blinking
Tag Sensed
Note that when the CS-490 antenna is performing power on auto-test, the
indicator lights will flash momentarily and the Green power LED will remain lit.
Figure 2 RF Controls CS-490 RFID Antenna Indicator Lights.
Red LED Fault Light Error Codes
Red LED Appearance
Error Code
OFF
No Arcon or Reader Issues
Solid Red
No Communication with the Reader for over an Hour
Two Blinks
Unable to Sweep
Nine Blinks
Error with BSU/BSA
Thirteen Blinks
Antenna Error-Reflected Power too High
Fourteen Blinks
Over Temperature Error