User's Guide

CS-445B NA BESPA User Guide RevC - Part # 11400-433 July 2019
7
-SOFTWARE
The BESPA is provided with a basic test program on a CD, to run on a Microsoft™ Windows
®
equipped Personal Computer. The program enables you to carry out a number of basic
tests. See the Technical Manual for further instruction on Software usage.
APPLICATION INTERFACE
The BESPA uses an International Standard, Application Program Interface (API) as defined
in ISO/IEC 24730-1. Further details of the API and commands are contained in the
Programmer’s Reference Guide.
-SPECIFICATIONS
CS-445B
Frequency
RF Radiated Power
Regulatory Compliance
Safety Regulations
Reading/Writing Protocols
FCC ID IC ID
Application Interface
UHF band: 902-928 MHz
1
Adjustable 0.2W to 4Watts EiRP
FCC, CFR47 Part 15.247, RSS-247 Issue 2,
RSS-Gen Issue 5, RSS-102 Issue 5
IEC62368-1
ISO18000-6C / EPC UHF Gen 2 EM 4122 (TTO)
FCC: WFQCS-445B IC: 10717A-CS445B
ISO/IEC 24730-1
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
Dimensions Weight
-22 to +113°F (-30 to +45°C)
-40 to +185°F (-40 to +85ºC)
5 to 85% non-condensing
24in x 24in x 4in (60 x 60 x 10 cm) 15 lbs (7 kg)
Ethernet LAN
RJ-45 Connector
Power
Current and Voltage
POE+ DC Input IEEE 802.3at Type 1 Class 3
0.35 Amp at +48Vdc
Antenna Gain
2
>6 dBi Circular Polarization
>9 dBi Linear Polarization Vertical and Horizontal
Antenna FWHM Beamwidth
3
33 degrees
1
The BESPA uses the RFC CS-445B RFID reader will be factory set at time of shipping, to suit the country of
installation and use. Transmit Frequency range for the CS-445B NA model is 902-928MHz
2
Value over Operating Frequency Range at all steer angles as referenced to an isotropic antenna.
3
Maximum -3dB FWHM value over Operating Frequency Range at all steer angles.