User's Manual
Table Of Contents
- User Manual
- Contents
- 1 – Introduction
- 2 – Hardware
- Front View – LED Indicators
- Rear View – Data Connections
- Antennas – Positioning
- Environmental Limits
- Tag Positioning
- 3 – Firmware
- File System
- Upgradeable Firmware
- Reader Setup
- Configuration Files & Default Settings
- 4 – Troubleshooting
- A – List of Acronyms
- B – Index
- C – FCC Compliance
© Copyright 2003 RF Code, Inc. All rights reserved. UM-C2020-R02-20030422.
No copying of this material is allowed without prior written permission. Page 21 of 27.
USER MANUAL – Mantis™ II 433.92MHz Reader
21
SYMPTOM – TagIDs do not drop off the computer display when the Tags are
moved away from the Reader.
• CONDITION – The antenna(s) are installed on the Reader.
• REMEDY – Verify that the data communication path from the Reader to the
computer is functional.
• REMEDY – Change the Reader’s range setting to a shorter range.
SYMPTOM – All the indicator lights on the Reader turn off and back on again.
• REMEDY – If the Reader is not in operation or off-line, the watchdog timer
inside the Reader periodically power-cycles the whole Reader. This is normal
operation.