Specifications

RFX-BRK Issue 1 page 17 of 19
Check that audio, video, triax, AC and DC cables of sufficient total length and are in good
condition. If extension cables are necessary ensure that the connectors are compatible and of
good quality to avoid problems at site.
Check that the receiving antenna/Receiver interfaces are clean and free from dust and other
unwanted materials.
If tripods are to be used to mount the equipment, make sure that some means of securing the
tripod or of weighting it down is provided. Gusty wind conditions may put installations at risk,
particularly when parabolic antenna dishes are to be used.
Make sure that all batteries to be used are fully charged and, whenever possible, provide a
spare with cable to connect it to the receiver.
Check that the receiver channel frequencies are compatible with those of the RFX-BRK
Transmitter. The receiver is labelled with channel number and frequency information.
7.3 Transmitter / Receiver tests
Whenever practical, set up the system and trial it before leaving for site to ensure that
all components of the system are working. Checking at base, where adjustments and
corrective actions can be made, will pay off when setting up at site.