Specifications

RFX-BRK Issue 1 page 13 of 19
6.3 Remote set-up of the 16 preset configurations.
PC software is supplied to allow each of the 16 preset rotary switch positions to be pre-
programmed according the operator's desired RF channel and COFDM modulation
parameters.
The RFX-BRK transmitter is connected to the PC via the combined DC/USB Lemo
connector. When connecting to the PC the user is recommended to use the USB data
cable supplied by RF Central which is fitted with the correct Lemo connector - see 4.1.3.
The required sequence when re-programming the profile information into the RFX-BRK
transmitter is as follows:
• Connect the power/data Lemo connector into the RFX-BRK.
• Switch on the power to the transmitter.
• Connect the USB lead to the PC.
• Start the programming software by double clicking on the file
MiniDigiTXConfig.exe.
• If required change the software for the correct comm. port by selecting the tab
Comms Settings.