Installation Manual

Page 17
Forced-Air Architectural
Wall Heater
Color
• Standard: white, almond, metallic silver, bronze, metallic charcoal,
aluminum, semi-gloss black.
• Custom colors available upon request.
Finish
• Standard: epoxy/polyester powder paint.
• Optional: anodized aluminum.
Voltage
• 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.
Construction
• Extruded aluminum front grille, 1/8 in. (3.2 mm) thick. 1
• Bottom air outlet.
• High-limit temperature control with automatic reset.
Fan
• Closed, factory-lubricated motor.
• 160 cfm fan (single unit: 55 dBA); 2 X 160 cfm fan (double unit: 58
dBA), 3 X 160 cfm fan (triple unit: 61 dBA). 2
• Fan delay purges heater of residual heat.
Heating element
• Durable tubular heating element with fins. 3
Control
• Built-in tamper proof thermostat included. 4
• 24V relay, with or without transformer available.
Note: Thermostat is not included in heater with factory installed relay.
Any remote thermostat or relay must be connected to the heater
control terminal block.
Installation
• Minimum clearance from the floor and adjacent walls: 10 in. (25.4
cm).
• Adaptor for surface mounting available.
• Up to 3 units can be mounted side-by-side
Warranty
• 3-year warranty against defects.
Application
• Apartment building, commercial building, entrance way,
stairwell, garage.
Features
123 4
With
surface
mounting
box
Recessed
KOE Ø22 mm
KOE Ø
7/8"
KOE Ø22 mm
KOE Ø
7/8"
408 mm
16
1/16"
810 mm
31
7/8"
767 mm
30
3/16"
1227 mm
48
5/16"
1185 mm
46
5/8"
578 mm
22
3/4"
40 mm
1
9/16"
368 mm
14
7/16"
51 mm
2"
212 mm
8
5/16"
74 mm
2
7/8"
55 mm
2
3/16"
34 mm
1
5/16"
506 mm
19
7/8"
34 mm
1
5/16"
51 mm
2"
51 mm
2"
Installation
(All Models)
Side View (All Models)
Surface
Recessed
Front ViewFront View Front View
Side View
Top View Top View
Top View
Required Wall
Depth Opening
Single Unit Double Unit Triple Unit
109 mm
4
5/16"
107 mm
4
3/16"
584 mm
23"
EHA