User's Manual
The AC/DC plug pack may become warm during normal use. Always allow
adequate ventilation around the AC/DC plug pack and use care when han-
dling. Unplug the AC/DC plug pack if any of the following conditions exist:
1/ The power cord or plug has become frayed or damaged.
2/ The adapter is exposed to rain, liquid, or excessive moisture.
3/ The adapter case has become damaged.
4/ You suspect the adapter needs service or repair.
5/ You want to clean the adapter.
Road Safely:
Use while driving a vehicle or riding a motorbike may be distracting. If you
nd using the Wireless Speaker Microphone disruptive or distracting while driv-
ing or riding, pull off the road and park before making or answering a call.
Use of the Wireless Speaker Microphone alone or with headphones (even if
used only in one ear) while driving or riding is not recommended and is illegal
in some countries. Consider using a compatible hands-free device. Use of a
hands-free device may be required in some areas. Check and obey the laws
and regulations regarding the use of mobile devices like the Wireless Speaker
Microphone in the areas where you drive or ride.
Vehicles Equipped with Air Bags:
An air bag inates with great force. Do not store the Wireless Speaker Micro-
phone or any of its accessories in the area over the air bag or in the air bag
deployment area.
Carrying and handling:
The unit contains sensitive components. Do not drop, disassemble, micro-
wave, burn, paint, or insert foreign objects. Do not use the unit if it has been
damaged—for example, if it is cracked, punctured, or damaged by water.
Keeping Clean:
Clean the Wireless Speaker Microphone and mobile charger immediately
should they come into contact with any contaminants that may cause mal-
function—e.g, ink, oils, dirt, food and drinks. To clean, turn off (press and hold
the On/Off button) and remove all cables. Then use a slightly damp soft cloth.
Don’t use solvents, turpentine window cleaners, or abrasive household clean-
ers to clean the unit.
Connectors and Press buttons:
Never force a connector into a port or apply excessive pressure to a button,
because this may cause damage that is not covered under the warranty. If
the connector and port don’t join with reasonable ease, they probably don’t
match. Check for obstructions and make sure that the connector matches
the port and that you have positioned the connector correctly in relation to
the port.
22